No road is straight. With our curved kerbs it is easy to design the inner and outer curves of curved roads. The kerbs are available in four different types, raw kerbs (rural) and degree cut (fine), with or without bevels. Rough kerbs are roughly chiseled, with only the rougher irregularities removed, while chiseled kerbs have a smoother, cross-hammered surface.
The radius of curved kerbs is usually between 0.5m and 12.0m, providing a wide range of options for a variety of applications. If you are looking for some similar types of kerbs, such as angle kerbs or corner kerbs, we have offers for you.
Creating soft shapes in your project gives a pleasant feeling that can enhance the entire project. Combining round kerbs with straight granite kerbs provides a complete solution for a specific design. We recommend that you cast the kerbs at the bottom for a stable installation and that at least half of the stone is lowered below the ground. Smooth assembly is achieved with the help of wooden wedges. When installed in a circle, the stone has a diameter of 1 meter and a radius of 0.5 meters.
The curved edging stones are manufactured in accordance with standard SS-EN 1343, which specifies dimensions, manufacturing tolerances and surface finishes.